Table 2-3. Monitor Cabinet and Status Monitor Module Operating Procedure M-1 cont'd

TM 5-6350-264-14&P-11

NAVELEX EE 181-AA-OMI-120/E121 C-73594-60-1

T.O. 31S9-2FSS9-1-11

Table 2-3. Monitor Cabinet and Status Monitor Module Operating

Procedure M-1 - Continued

Indication

Operator response

4. SECURE indicator lights (green)

a. Momentarily place RESET/ACK switch on associated Status Monitor

flashing and audible signal device

Module in the ACK position.

sounding.

b. If change to SECURE is not part of a prearranged securing of protected

area, direct security personnel to indicated protected area to ensure

that area is physically secure.

5. AC POWER indicator lights(white)

a. Momentarily place RESET/ACK switch on associated Status Monitor

flashing and audible signal device

Module in the ACK position.

sounding.

b. If lights extinguish, inform designated personnel that ac power to

associated protected area has just been lost (NOTE 2) (NOTE 4).

If lights stay on steady state, ac power has been restored to Control

Units.

NOTE 1

If alarm occurs when SECURE lights (green) are on, a high probability exists that personnel

are tampering with the system in the protected area or that personnel in the protected area

are in danger. Security personnel responding to the alarm should be provided with this

information if possible.

NOTE 2

Abnormal conditions shall be reported to the following personnel:

,telephone

NOTE 3

At normal operating temperatures [60 to 100 (15.6 C to 37.8 )], Monitor Cabinet

battery will supply power for at least the following times:

One-zone, 24 hours.

Five-zone, 20 hours.

Twenty-five-zone, 12 hours.

2-5