CHAPTER 3 OPERATING INSTRUCTIONS - TM-5-6350-262-14-110018

TM 5-6350-262-14/11, C2

NAVELEX 0967-LP-466-9112

T.O. 31S9-4-39-1, C2

CHAPTER 3

OPERATING INSTRUCTIONS

3-1. Operator Controls

controls and indicators illustrated in figure 3-1. The

controls and indicators are identical for all models of the

monitor cabinet.

Table 3-1 lists and describes the monitor cabinet(s)

Figure 3-1. Monitor cabinet controls and indicators.

3-2. Preliminary Starting Procedure

unlock and open the monitor cabinet door. Set the

POWER switch, located on the power supply inside the

cabinet, to ON.

To place the monitor cabinet(s) in operation,

Table 3-1. Operator's Controls

Control or indicator

Function

Lamp test/ acknowledge switch (2-position toggle)

When placed in the lamp test position it causes all

lamps on the signal module to light.

When placed in the acknowledge position, it causes the

AC power monitor lamps to stop flashing and

silences the audible alarm.

Monitor AC power (indicating lamps)

When on continuously, indicates the cabinet is operating

on ac power.

When flashing indicates the power in the cabinet has

changed state either from ac to battery, or battery to

ac.-When off continuously, indicates the cabinet is

operating on battery power

Audible alarm (aural alarm)

When the audible alarm is sounding, the power has

changed state either from ac to battery, or battery to

ac. This is coupled with a change in state of the

monitorac power lamps

When the audible alarm is sounding and there has been

no change in state of the monitor AC power lamps,

this indicates an alarm is being presented at the

alarmmonitor module(s).

3-1