|
|
Figure 7-4. Landing gear outer and inner leg disassembly.
c. Loosen and remove three 3/8-24 hex nuts (7) and
7-12. Crankshaft Disassembly (fig.7-50)
washers (8) securing crankshaft housing (6).
a. Loosen and remove 3 / 8-24 hex lock nut (1) and
d. Remove crankshaft housing (6).
special hex head cap screw (2) and two washers (3)
e. Loosen and remove six hex head screws (9)
b. Remove crank (4) crank hook (5) from crankshaft
securing gear housing cover 10).
housing
(6).
f. Remove gear housing cover (10) with its two
7-8
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |