High Voltage Cabinet

by feel (with operating handle) that switch operates

side of trailer. Remove a 3 / 4 inch diameter by 10 foot

long grounding rod from the deck. Drive grounding rod

correctly. If switch operates hard or contacts are

misaligned, see paragraph 3-10. When switch operates

into the ground approximately 8 foot. Clamp the No. I

ground wire to the grounding rod.

normally, switch it to the open position. Make sure

switch position indicator (2) reads open, and observe by

sight that switch is open. Remove operating handle and

High Voltage Cabinet .Unlock and remove bar

return it to storage cabinet. Open upper and lower front

(4, fig. 2-1) covering load break switch operating handle

panels and make a visible check to see that all

switch socket (3). Remove switch handle from storage

connections are tight.

cabinet, insert it into socket and operate switch a few

times: Observe through switch inspection window (I and

2-2