Figure D-2-5. Attachment of Joist Supports.

TM 43-0156

Figure D-2-5. Attachment of Joist Supports.

(a)

Side to Skid. Place a lag bolt not less than 3 inches from the end of the cleat through each end

of the lower longitudinal cleat of the side panel and into the skid. Equally space additional bolts between the

two end bolts, with no distance exceeding 12 inches.

(b)

End to Header. Place a lag bolt through each end of the lower filler cleat and into the end

header not less that 2 inches nor more than 3 inches from the end of the filler cleat. Equally space additional

bolts between the end bolts, with no distance exceeding 12 inches. Two lag bolts are required through each

end filler cleat.

D-2-10