 |
|||
|
|
|||
|
Page Title:
Drive Belts and Pulleys. |
|
||
| ||||||||||
|
|
 TM 43-0156
Step
Function
Mech
Insp
3
(d) Atomize spray air intake with preservative oil
cont
(9150-00-111-0209) while manually cranking com-
pressor.
(e) Coat the interior surfaces of the air cleaner with
preservative oil (9150-00-111-0209).
(f) Drain excess preservative.
(g) Install the element.
(h) Wrap air filter with barrier (8135-00-226-3124)
and secure with tape (7510-00-916-9659). Tape
7510-00-890-9875 may be used as a substitute.
(i) Prepare a tag (8135-00-292-2345) indicating
"CRANKCASE FILLED TO OPERATING LEVEL WITH
PRESERVATIVE OIL GOOD FOR OPERATION UNTIL FIRST
REQUIRED LUBRICANT CHANGE - DO NOT DRAIN -
CHECK OIL LEVEL - IF LOW, FILL TO OPERATING LEVEL
WITH OIL AS SPECIFIED IN LO 5-6115-550-12."
(j) Attach the tag to the compressor.
(k) Cover compressor output openings with tape
(7510-00-916-9659). Tape 7510-00-890-9875
may be used as a substitute.
(3)
Drive Belts and Pulleys.
(a) Remove drive belts.
(b) Paint unpainted surface of pulley grooves with
primer (8010-00-292-1127).
(c) Install belts but do not tighten.
(d) Prepare a tag (8135-00-292-2345) indicating "BELT
TENSION RELIEVED, ADJUST PRIOR TO STARTING."
(e) Attach tag to belt guard.
(4)
Depreservation Guides.
(a) Complete two DA Forms 2258 for the compressor.
(b) Place one copy in a plastic bag (8105-00-259-
4662), heat seal or staple bag. Secure the bag to
the compressor.
(c) Place the other copy in the logbook.
Change 1
B-2-88
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals