Fan Belt.

TM 43-0156

Step

Function

Mech

Insp

(b) Wrap or cover the governor with barrier (8135-00-

cont

224-8885) and secure the barrier with tape (7510-

00-266-6715).

(11) Fan Belt.

(a) Remove the fan belt.

(b) Coat unpainted surfaces of pulley grooves with

(d) Prepare a tag (8135-00-292-2345) indicating

"RADIATOR FAN BELT TENSION RELIEVED - ADJUST PRIOR

TO STARTING ENGINE."

(e) Attach the tag to the engine control panel.

(12) Manual Prelube Pump Handle. Place cushioning (8135-

00-855-6969) between handle and pump and secure

handle with tape (7510-00-916-9659). Tape 751000-

890-9875 may be used as a substitute.

(13) Exhaust Stack.

(a) Cover exhaust stack with barrier (8135-00-224-

8885).

(b) Install 5/16-inch plywood (5530-00-618-6955)

(16-1/4 diam) and secure with tape (7510-00-916-

9659). Plywood (5530-00-618-6956) and tape (7510-

00-890-9875) may be used as substitutes.

(14) Thermometers.

(a) Remove thermometers (two) (one) and seal openings

(b) Wrap thermometers with cushioning (8135-00-855-

6969) and secure with tape (7510-00- 266-6715).

2). Seal box with tape (7510-00- 266-6655).

Secure box inside engine control panel with tape

(7510-00-916-9659). Mark box "THERMOMETERS."

Tape 7510-00-890-9875 may be used as a substitute.

Change 1

B-2-83