Engine Mounted Air Tank.

TM 43-0156

Step

Function

Mech

Insp

(c)

Mark box as to contents and secure with tape

cont.

(7510-00-266-6715). Place in a fiberboard box (6

x 6 x 18) and seal with tape (7510-00-226-6715).

(d) Prepare a tag (8135-00-292-2345) Indicating "FLOAT

BALLS AND RODS ARE LOCATED INSIDE

ENGINE CONTROL CABINET."

(e) Attach the tag to the engine start controls.

(f) Atomize spray the interior of the tanks with

preservative oil (9150-00-111-0209) using a

flexible nozzle of sufficient length to assure

coverage of all interior surfaces of the tanks.

(g) Install float covers.

(h) Allow the tanks to stand, with the drain plugs

removed, until the preservative oil flow ceases.

(i) Coat drain plugs with the same preservative oil

and install.

(j) Seal fuel tank vent hole with tape (7510-00-916-99659).

NSN 7510-00-890-9875 may be used as a

as a substitute.

(8) Engine Mounted Air Tank.

(a) Open drain cocks.

(b) Atomize spray interior surfaces with preservative

cocks open.

(9) Air Start Motor.

(a) Fill the oiler with the preservative oil (9150-00-111-0209)

and reset metering valve.

(b) Seal all starting motor openings with tape

(10) Governor.

(a) Coat linkages, pins, and other metallic devices

not enclosed with preservative grease (9150-00-190-0905)

Change 1

B-2-82