Packing for the Electrolyte (25 gal).

TM 43-0156

Step

Function

Mech

Insp

(3)

Wrap seal fuel transfer pump In MIL-B-121 barrier

cont.

and secure with PPP-T-60 tape.

(4)

Place each pump into a PPP-B-636 fiberboard box (21

x 8-1/2 x 11-1/4) and seal box with PPP-T-76 tape.

(5)

Place both boxes containing fuel transfer pumps into

a PPP-B-601 box (21-3/8 x 18 x 12) fabricated in ac-

for list of materials. Close and secure box lid.

Packing for the Electrolyte (25 gal).

(1) Fabricate a PPP-B-601 box (56 x 29-3/4 x 21-1/2) in

for list of materials required.

(2) Fill bottom of box with 3 inches of HH-I-585 thermal

insulation.

(3) Place the five containers (5 gal) of electrolyte,

spaced 3 inches between each container on top of the

insulation.

(4) Fill void with HH-I-585 thermal insulation to the

level of the top edge of the wooden box.

(5) Close and secure box lid.

CONSOLIDATED PACKING CRATE.

(1) Fabricate a MIL-C-104 crate (86-3/4 x 55-3/4 x

44-1/2) in accordance with appendix D-3. Refer to

B-2-11 and table B-2-19 (2000 KW) for list of

materials.

(2) Place items on base in accordance with figure

B-2-10 or B-2-11.

(3) Secure with QQ-S-781 steel strapping, edge protec-

tors, and seals.

(4) Place crate top on base and secure with FF-W-92

washer and FF-B-561 lag bolts (1/2 x 4).

(5) Mark containers in accordance with appendix E and

mark all four sides of the container with 2-inch

minimum size letters to indicate "REUSABLE CON-

TAINER - DO NOT DESTROY."

B-2-57