Preservation of the Fuel Transfer Pump (two).

TM 43-0156

Step

Function

Mech

Insp

Preservation of the Technical Manuals and Logbooks.

Cont.

(1)

Place technical manuals and logbooks into a

MIL-B-117 bag and seal.

(2) Place the technical manuals and logbooks into the

box with the control and power cables.

(3) Mark bag to indicate contents.

Packing for the Power Cable (675 ft for 1500 KW, 900ft

for 2000 KW), Ground Wire (200 ft), Control Cable (three

for 1500 KW, four for 2000 KW), Neutral Conductor (four

for 2000 KW), Battery Jumper Cables, Bolt, Nuts, Lock-

washers, and Ground Rod Clamp Box and Technical Manual,

and Logbooks.

(1) Fabricate a PPP-B-601 box (44 x 44 x 20 for the 1500

KW) (44 x 44 x 26 for the 2000 KW) in accordance

with appendix D-1. Refer to tables B-2-14 (1500 KW)

or B-2-15 (2000 KW) for list of materials.

(2) Place the power cables in box. Place the control

cables inside the power cables.

(3) Place the ground cable into a PPP-B-636 fiberboard

box (11 x 11 x 4), seal box with PPP-T-76 tape, and

place the box in the center of the power cables.

(4) Place the box containing bolts, nuts, lockwashers,

and ground rod clamps and the box containing bat-

tery Jumper cables on top of the ground cable box.

(5) Place the bag containing technical manuals and log-

books on top of box containing bolts, nuts, lock-

washers, and ground clamps.

(6) Mark the box to identify nomenclature and quantity

of contents.

Preservation of the Fuel Transfer Pump (two).

(1) Atomize spray the inlet and outlet of the pump with

MIL-L-212360 grade 30, type I, preservative oil and

allow to drain.

(2) Seal off the inlet and outlet of the pump with

MIL-C-5501 caps on PPP-T-60 tape.

B-2-54