|
|
NAVAIR 17-15-50.4
TM 38-301-4
T.O. 33-1-37-4
CGTO 33-1-37-4
COMPONENT:
Detroit Diesel Allison MT 654CR (Transmission)
LUBRICANT: MIL-L-2104
Fe
Ag
Al
Cr
Cu
Si
Sn
Ni
Pb
Mo
Mg
Normal Range
0-146
0-6
0-15
0-4
0-500
0-21
0-6
0-23
147-
501-
Marginal Range
7
16-19
5
22-26
7-8
24-28
180
625
626-
181-
27-33
9-10
29-35
8-9
20-23
6-7
High Range
780
225
Abnormal
226+
10+
24+
8+
781+
34+
11+
36+
Abnormal Trend
(PPM Increase
45
3
4
2
160
7
3
7
in 10 hrs)
TECHNICAL INFORMATION
* The manufacturer states normal break-in is 5000mi/200hr/12mo,
whichever is longest. During this time, an increase in Cu alone is
not cause for concern. No action should be taken except to change
oil when Cu reached 900 PPM. If Cu and another wear-metal
element increase simultaneously, detrimental wear may be
occurring and routine evaluation techniques apply.
Silicon additives may be used as antifoaming agents in the
lubricating oil, thus new oil normally gives a reading of 3 to 7
PPM silicon.
Aluminum particles are commonly found in the transmission pan.
Aluminum and cast iron parts have significant amounts of silicon
in their composition.
Transmission is liquid-cooled; therefore, ethylene glycol may be
present in the oil. If significant amounts of ethylene glycol are
found, it is suggested that appropriate action be taken because the
clutches and seals may be affected accordingly.
APPLICABLE END ITEMS
M923, M924, M925, M927, M928, M929, M940, M941, M942, M943, M944, M945, M930, M931, M932, M934, M936
M939
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |