Section I: INTRODUCTION - TM-32-5865-218-24-P0119

TM 32-5865-218-24&P

Section I.

INTRODUCTION

C-1. Scope.

This appendix lists spares and repair parts; special

tools; special test, measurement, and diagnostic equipment (TMDE);

and other special support equipment required for performance of di-

rect support maintenance of Countermeasures Control

C-11124/ALQ-151(V) and Countermeasures Indicator Panel

ID-2300/ALQ-151(V) .

It authorizes the requisitioning and issue of

spares and repair parts as indicated by the source and maintenance

codes.

C-2. General. This repair parts and special tools list is divided

into the following sections.

a. Section II. Repair Parts List. A list of spares and repair

parts authorized for use in the performance of maintenance. The

list also includes parts that must be removed for replacement of the

authorized parts. Parts lists are composed of functional groups in

numerical sequence, with the parts in each group listed in figure

and item number sequence.

Section III.

Special Tools List.

Not applicable.

Section IV. National Stock Number and Part Number Index. A

list, in national item identification number (NIIN) sequence, of all

national stock numbers (NSNs) appearing in the listings, followed by

a list, in alphamerical sequence, of all part numbers appearing in

the listings. National stock numbers and part numbers are cross-

referenced to each illustration figure and item number appearance.

Explanation of Columns.

C-3.

Illustration.

This column is divided as follows:

Indicates the figure number of the illus-

(1) Figure Number.

tration on which item is shown.

(2) Item Number.

The number used to identify item called out

in the illustration.

Source, Maintenance, and Recoverability (SMR) Codes.

(1) Source Code.

Source codes indicate the manner of acquir-

ing support items for maintenance, repair, or overhaul of end items.

Source codes are entered in the first and second positions of the

Uniform SMR Code format as follows: