|
|
TM 32-5865-218-24&P
recommendations for improving this publication by the individual user
is encouraged. Reports should be submitted on DA Form 2028
(Recommended Changes to Publications) and forwarded directly to the
Commander, U.S. Army Electronic Materiel Readiness Activity, EMRA,
Vint Hill Farms Station, Warrenton, Virginia 22186, Attn:
SELEM-ME-E.
will be prepared using SF 368, Quality Deficiency Report.
Instructions for preparing EIRs are provided in DA PAM 738-750, The
EIRs should be mailed
Army Maintenance Management System (TAMMS).
directly to the Commander, U.S. Army Electronic Materiel Readiness
Activity, EMRA, Vint Hill Farms Station, Warrenton, Virginia 22186,
A reply will be furnished directly to you.
Attn: SELEM-ME-F.
DESCRIPTIONS AND DATA
Section II.
description and data for general support maintenance of the ECM
panel indicator.
In addition to the description contained
a. Description.
herein, refer to TM 32-5865-012-10 for a general description and
illustration of the ECM panel indicator. The ECM panel indicator is
a metal enclosure that contains five lamps, two switches, and a dual
illumination control. The lamps indicate system caution and
operation conditions. The switches control external system
The illumination control provides two variable outputs
equipment.
that adjust the brightness of lamps on external system equipments.
ECM panel indicator power and input/output connections are made at
the rear panel (see table 1-1).
ECM Panel Indicator Power and Signal
Connections
Connector
Function/Remark
Pin
marking
115V ac 400 Hz in
A
J1
115V ac 400 Hz neutral in
B
J1
115V ac 400 Hz ground in
C
J1
115V ac 400 Hz out
D
J1
E
115V ac 400 Hz neutral out
J1
115V ac 400 Hz ground out
F
J1
PLAIN TEST FM indicator
G
J1
NO FM ANTENNA indicator
H
J1
Lamp dimmer power input
J
J1
K
MASTER CAUTION indicator
J1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |