Section I: INTRODUCTION - TM-32-5865-216-24-P0087

TM 32-5865-216-24&P

Section I.

INTRODUCTION

C-1. Scope. This appendix lists spares and repair parts; special

tools; special test, measurement, and diagnostic equipment (TMDE); and

other special support equipment required for performance of direct

support maintenance of Tunable Coupler CU-2293/ALQ-151(V). It

authorizes the requisitioning and issue of spares and repair parts as

indicated by the source and maintenance codes.

C-2. General.

This repair parts and special tools list is divided

into the following sections:

a. Section II. Repair Parts List. A list of spares and repair

parts authorized for use in the performance of maintenance. The list

also includes parts which must be removed for replacement of the

authorized parts. Parts lists are composed of functional groups in

numerical sequence, with the parts in each group listed in figure and

item number sequence.

Section III.

Special Tools List.

Not applicable.

Section IV.

National Stock Number and Part Number Index. A

list, in national item identification number (NIIN) sequence, of all

national stock numbers (NSNs) appearing in the listings, followed by

a list, in alphanumerical sequence, of all part numbers appearing in

the listings. National stock numbers and part numbers are cross-

-referenced to each illustration figure and item number appearance.

Explanation of Columns.

C-3.

Illustration.

This column is divided as follows:

(1) Figure Number.

Indicates the figure number of the

illustration on which item is shown.

(2)

The number used to identify item called out

Item Number.

in the illustration.

Source, Maintenance, and Recoverability (SMR) Codes.

(1) Source Code. Source codes indicate the manner of acquiring

support items for maintenance, repair, or overhaul of end items.

Source codes are entered in the first and second positions of the

Uniform SMR Code format as follows: