Make sure MASTER switch is
OFF before repairing electrical
components. Failure to observe
this warning could result in in-
jury or death.
the batteries before removing or
harness or lead may result in in-
Install shock assembly mount (1), ground
(3) and secure using four assembled
washer bolts (4).
Install two shock mount to boom cylinders
hose clamps (5) and (6). Install gas par-
ticulate filter unit (7) in frame assembly
(3) and secure by engaging holddown
Connect M10 hose assembly (9) and M7
hose assembly (10) to gas particulate filter
Connect and screw in connector (11) to
gas particulate filter unit (7).
Connect ground cable assembly (2) to gas
particulate filter unit (7). Tighten machine
screw (12). Turn MASTER switch to ON.