REMOVAL - TM-9-2350-238-20-10566

TM 9-2350-304-20-1

2-65. MAINTENANCE OF AERATION DETECTOR (CONT).

REMOVAL (CONT)

Remove hexagon plain nut (6), Iockwasher

(7), hexagon head capscrew (8), and loop

clamp (9) from tube support angle bracket

(10).

Disconnect pipe straight adapter (11) and

pipe to tube elbow (12) from rate of flow

control (3).

Remove pipe straight adapter (11) and

pipe to tube elbow (12) from metal tube

assembly (13).

Remove hexagon plain nut (14), lock-

washer (15), hexagon head capscrew

(16), hexagon head capscrew (17),

Iockwasher (18), loop clamp (19), and

tube support angle bracket (20) from rate

of flow control (3).

Disconnect metal tube assembly (21) from

pipe to tube elbow (22).

Remove pipe to tube elbow (22) from rate

of flow control (3).

Remove three hexagon head capscrews

(23), three Iockwashers (24), and rate of

flow control (3) from detector mounting

and engine lifting plate (25).

NOTE

Retain screws removed from detector

mounting and engine lifting plate.

Remove detector mounting and engine

lifting plate (25) and existing screws from

engine.

1 Inspect for broken, damaged, or missing parts.

2 Repair is by replacement of authorized parts (TM 9-2350-238-24P-1).

2-540