 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-270-20-3
HEATER MOTOR
This task covers:
a. Removal (page 4-1270)
b. installation (page 4-1270)
INITIAL SETUP
Personnel Required
Tools
One
Handle, speeder, 1/4-inch drive
Socket, 1/4-inch, 1/4-inch drive
Equipment Condition
Screwdriver, fiat-tip, 3/16-inch
Battery ground cable disconnected
Materiais/Parts
(page 4-444).
Lockwasher, wire to suppressor
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
Unplug.
Red wire to
Red wire to
1.
suppressor (2)
switch (1)
Screw (5), iock-
a. Using screwdriver, unscrew and take
2.
Red wire to
out.
washer (6), and
motor (3) to
b. Get rid of lockwasher (6).
wire (3)
suppressor (4)
Using 1/4-inch socket and handle, unscrew
Screw (8) and
3.
Suppressor (4) to
and take off.
suppressor (4)
heater (7)
Using 1/4-inch socket and handle, unscrew
Screw (10) and
4.
Black wire (9) to
and take off.
wire (9)
heater (7)
Using 1/4-inch socket and handle, unscrew
Three screws (12)
Motor assembly (11)
5.
and take out.
to heater (7)
Take out.
Motor assembly(11)
Heater (7)
6.
INSTALLATION
Place in position.
Motor assembly(11)
7. Heater (7)
Screw in and tighten using 1/4- inch
Three screws (12)
8. Motor assembly(11)
socket and handle.
to heater (7)
Put on.
Black wire (9)
9. Screw (10)
4-1270
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals