 |
|||
|
|
|||
|
Page Title:
SHIFT CONTROL HOUSING AND SUPPORT |
|
||
| ||||||||||
|
|
 TM 9-2320-270-20-2
SHIFT CONTROL HOUSING AND SUPPORT
This task covers:
c. Installation (page 4-540)
a. Removal (page 4-538)
b. Cleaning/Inspection (page 4-540)
INITIAL SETUP
Materials/Parts Continued
Tools
Lockwasher, support to housing
Handle, ratchet, 3/8-inch drive
(four required)
Screwdriver, flat-tip, 1/4-inch
Lockwasher, support to seat
Socket, 7/16-inch, 3/8-inch drive
(four required)
Wrench, open-end, 7/16-inch
Personnel Required
Materials/Parts
One
Lockwasher, housing to cab floor
(four required)
Lockwasher, housing to shift control
(four required)
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
Using flat-tip screwdriver, unscrew and
Two screws (3)
1. Gate assembly (1)
take out.
to housing (2)
Move to first gear (6).
Shift lever (5)
2. Shift control (4)
Using flat-tip screwdriver, unscrew and
Two screws (7)
3. Gate assembly (1)
take out.
to housing (2)
Unscrew and take off.
Knob (8)
4. Shift lever (5)
a. Using flat-tip screwdriver, pry leg
Lampholder
5. Gate assembly (1)
.
(10) of Iampholder bracket (9) away
bracket (9)
from gate assembly (1).
b. Pull off gate assembly (1).
Take off.
Gate assembly (1)
6. Housing (2)
4-538
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals