ETHER SUPPLY LINES

TM 9-2320-269-34-1

ETHER SUPPLY LINES

This task covers:

a. Removal (page 2-384)

Inspection/Replacement (page 2-386)

b. Cleaning (page 2-385)

Installation (page 2-386)

INITIAL SETUP

Tools

Materials/Parts - Continued

Extension, 3/8-inch drive, 3-inch,

Solvent, drycleaning (item 49, appendix B)

Handle, ratchet, 3/8-inch drive

Tape, teflon, sealing (item 55, appendix B)

Socket, 3/8-inch drive, 1/2-inch

Wrench, open-end, 3/8-inch

Personnel Required

(two required)

Wrench, open-end, 7/16-inch

One

Equipment Condition

Materials/Parts

Left side hood panel raised

Lockwasher, clamp (two required)

(TM 9-2320-269-20-1).

Rags, wiping (item 42, appendix B)

Air cleaner removed (TM 9-2320-269-20-1).

ACTION

LOCATION

ITEM

REMARKS

REMOVAL

Ether fumes are flammable under pressure and can explode. To avoid serious injury or death, do not

smoke, allow open flame near, or hit ether cartridge with tools.

1. Coupling (1) and

Tube (3)

Using 3/8-inch and 7/16-inch open-end

fitting (2)

wrenches, unscrew and take out.

2. Two intake manifold

Two tubes (5)

Using two 3/8-inch open-end wrenches,

connectors (4)

unscrew and take off.

3. Two clamps (6)

Two screws (7) and

a. Using 112-inch socket, 3-inch

lockwashers (8)

extension, and ratchet handle with

3/8-inch drive, unscrew and take out.

b. Get rid of lockwashers (8).

Two tubes (5) and

a. Take out.

fitting (2)

b. Take off clamps (6).

2-384