 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-269-34-1
ENGINE OIL COOLER
This task covers:
a. Removal (page 2-218)
d.
Inspection/Replacement (page 2-220)
b. Disassembly (page 2-219)
e.
Assembly (page 2-220)
c. Cleaning (page 2-220)
f.
Installation (page 2-221)
INITIAL SETUP
Tools
Materials/Parts - Continued
Extension, socket-wrench, 3-inch
Seals, oil (two required)
Handle, ratchet, 318-inch drive
Solvent, drycleaning (item 49, appendix B)
Socket, 3/8-inch drive, 9/16-inch
Vise, machinist's
Personnel Required
Wrench, open-end, 1-inch
Wrench, open-end, 1 1116-inch
One
Wrench, open-end, 1 118-inch
Wrench, pipe
Equipment Condition
Materials/Parts
Left side engine compartment hood raised
(TM 9-2320-269-20-1).
Lockwashers (four required)
Rags, wiping (item 42, appendix B)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Elbow (1)
Tube assembly (2)
Using 1 1116-inch and 1 1/8-inch
open-end wrenches, unscrew and take off.
2.
Connector (3)
Tube assembly (4)
Using 1 118-inch and 1 1116-inch
open-end wrenches, unscrew and take off.
3.
Oil cooler
Four screws (6)
a.
Using 9/16-inch socket, 3-inch exten-
assembly (5)
and lockwashers (7)
sion, and ratchet handle with 3/8-inch
drive, unscrew and take out.
b.
Get rid of lockwashers (7).
4.
Oil cooler bracket
Oil cooler
Take off.
assembly (8)
assembly (5)
5.
Two seals (9)
a.
Take out.
b.
Get rid of.
2-218
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals