ATTACH M81 IGNITER AND FIRE

ATTACH M81 IGNITER AND FIRE.

a. Make sure blast area is clear of personnel and equipment.

NOTE

If shipping plug is removed, shock tube will not properly seat in M81.

b. Loosen (do not remove) fuse holder cap

(1) counterclockwise on M81 and

remove weather-proofing plug (2). Do

not remove shipping plug (3).

c. Using a knife, cut off 1 inch from sealed

end of shock tube (4).

d. Insert shock tube (4) in hole of shipping

plug (3). Push in shock tube (4) as far as

it will go.

e. Tighten fuse holder cap (1) clockwise to

secure shock tube (4).

Hold M81

securely and pull lightly on shock tube

(4) to assure it is secure.