Quantcast Table 2-6. Troubleshooting of Laser Power Supply Control C-9135/VVG-1 (A77)--Continued - TM-9-1240-369-340035

 

Click here to make tpub.com your Home Page

Page Title: Table 2-6. Troubleshooting of Laser Power Supply Control C-9135/VVG-1 (A77)--Continued
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
Table 2-6. Troubleshooting of Laser Power Supply Control C-9135/VVG-1 (A77)--Continued - TM-9-1240-369-340034
Up
TM-9-1240-369-34 Range Finder Fire Control: (Laser) AN/VVG-1 (1240-00-470-2156) Manual
Next
Table 2-6. Troubleshooting of Laser Power Supply Control C-9135/VVG-1 (A77)--Continued - TM-9-1240-369-340036
TM 9-1240-369-34
Table 2-6. Troubleshooting of Laser Power Supply Control C-9135/VVG-1 (A77)-Continued
Item
No.
Malfunction
Probable cause
Corrective action
2
RANGE (METERS)indicator
+0.2:0.2 V, return A77 unit to depot
unit A79 does not display
for repair
correct readout-continued
34.
Using multimeter, measure
voltage at pins 14 and 15 of A77A4
card. If multimeter indicates 15.0 1.0
V and + 4.0 1.5 respectively, replace
A77A4 card and perform steps 27 thru
29, and 61 thru 63.If multimeter does
not indicate +15.0 1.0 V and 4.0 1.5
V, respectively, perform steps 21 thru
26.
35.
Using oscilloscope, measure signal at
pin 27 of A77A4 card. If signal
compares with figure 2-11,continue
with step 36. If signal does not
compare with figure 2-11, continue
with step 13.
36.
Using oscilloscope, measure signal at
pin 12 of A77A4 card. If signal
compares with figure 2-12, continue
with step 50. If signal does not
compare with figure 2-12. continue
with step 37.
37.
Perform step 32. If signal compares
with figure 2-10, Continue with step 38.
If signal does not compare with
figure 2-10. continue with step 33.
38.
Using multimeter, measure voltage at
pin 10 of A77A4 card. If multimeter
indicates +4.0 1.5 .V replace A77A4
card and perform steps 27 and 28. If
multimeter does not indicate +4.0 1..5
V, continue with step 39.
39.
Using multimeter, measure voltage
at pin 9 of A77A4 card. If multimeter
indicates +5.0 0.5V, replace A.77A4
card and perform steps 27 and 28. If
multimeter does not indicate
+5.0 0.5V. continue with step 40.
40.
Disable interlock switch S1 on chassis.
41.
Remove A77A7 card para 3-7c).
42.
Install extender card (11, table 2-2).
43.
Insert A7TAT card into extender card
connector.
44.
Enable interlock switch S1 on chassis.
45
Using multimeter. Measure voltage at
pin 10 of A77A7 card. If multimeter
indicates+5.0 0.5V. return A77 unit to
depot for repair. If multimeter does
not indicate +4.0 1.5 V, continue with
step 46.
2-17

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business