Quantcast Table 2-6. Troubleshooting of Laser Power Supply Control C-9135/VVG-1 (A77)--Continued - TM-9-1240-369-340036

 

Click here to make tpub.com your Home Page

Page Title: Table 2-6. Troubleshooting of Laser Power Supply Control C-9135/VVG-1 (A77)--Continued
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
Table 2-6. Troubleshooting of Laser Power Supply Control C-9135/VVG-1 (A77)--Continued - TM-9-1240-369-340035
Up
TM-9-1240-369-34 Range Finder Fire Control: (Laser) AN/VVG-1 (1240-00-470-2156) Manual
Next
Table 2-6. Troubleshooting of Laser Power Supply Control C-9135/VVG-1 (A77)--Continued - TM-9-1240-369-340037
TM 9-1240-369-34
Table 2-6. Troubleshooting of Laser Power Supply Control C-9135/VVG-1 (A 77)-Continued
Item
No.
Malfunction
Probable cause
Corrective action
2
RANGE (METERS)indicator
46. Using multimeter measure voltage
unit A79 does not display
at pin 11 and 12 of A77A7card. If
multimeter indicates + 0.2 0.2V and
correct readout--continued.
+4.0 1.5 V. respectively. replace
A77A7 card and continue with step
47 If multimeter does not indicate
+0.2 0.2 V and + 4.0 1.5 V re-
spectively. return A77 unit to depot
for repair.
47. Perform steps 27 and 28, and
continue with step 48.
48. Install A77A4 and A77A7 cards (para
3-5c) and continue with step 6 1.
49. Enable interlock switch S1 o n chassis.
50. Perform step 33. If multimeter
indicates +0.2 0.2 V, continue with
step 51. If multimeter does not
indicate +0.2 0.2 V. Return A77 unit
to depot for repair.
51. Perform step 38. If multimeter
indicates +4.0 1.5 V, continue with
step 52. If multimeter does not
indicate +4.0 1.5V,perform steps 41
thru 46.
52. Using multimeter, measure voltage at
pin 9 of A77A4 card. If multimeter
indicates +4.0 1.5 V. continue with
step 57. If multimeter does not
indicate + 4.0 1.5 V. continue with
step 53.
53. Perform steps 41 thru 44.
54. Using multimeter. Measure voltage
at pin 10 of A77A7 card. If multimeter
indicates + 4.0 1.5 V. return A77 unit
to depot for repair. If multimeter does
not indicate +4.0 1.5 V. continue with
step 55.
55. Using multimeter measure voltage at
pins 11 and 12 of A77A7 card. If
multimeter indicates + 0.2 0.2 V and
+4.0 1.5 V, respectively. replace
A77A7 card and continue with step 56.
If multimeter does not indicate
+0.2 0.2 V and +4.0 1.5 V,
respectively. return A77 unit to depot
for repair.
56. Perform steps 27, 28,48 and 49.
57 Using oscilloscope. Measure signal at
pin 7 of A77A4 card. If signal
compares with figure 2-10, continue
with step 60. If signal does not
compare with figure 2-10 continue with
step 58.
2-18

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business