F I X E D RESISTOR INSTALLATION
TOOLS: #2 cross tip screwdriver (Phillips type)
SUPPLIES: Solder (item 5, App. A)
Sealing compound (item 4, App. A)
REFERENCES: JPG 41C for: Soldering wires
Using sealing compound
EQUIPMENT CONDITION: Infinity sight on work bench
Using screwdriver, install two washers (1), two screws (2) and fixed resistor (3) on back
of cover (4).
Put a small amount of sealing compound on threads of six screws (5) and cover (4)
Using screwdriver, install six washers (6) and six screws (5) while holding cover (4) in
place on infinity sight housing (7) with flat surfaces lined up.
Do checkout procedure (Vol I, para 2-2).
END OF TASK