CHAPTER 3 OPERATOR MAINTENANCE INSTRUCTIONS

TM 5-6350-264-14&P-4

NAVELEX EE 181-AA-OMI-050/E121 DT546 M9442

TO 31S9-2FSS9-1A4

CHAPTER 3

OPERATOR MAINTENANCE INSTRUCTIONS

Section I. LUBRICATION INSTRUCTIONS

This section is not applicable.

Section II. PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)

3-1. PMCS PROCEDURES. The VS requires minimum

requirements. Any defects occurring during operation

will be noted for correction during equipment shutdown.

organizational maintenance. The necessary PMCS to

Record all deficiencies and corrective actions on DA

be performed are listed in table 3-1. The item numbers

Form 2404.

indicate

the

sequence

PMCS

Table 3-1. Operator's Preventive Maintenance Checks and Services

Sequence no.

Items to be inspected

Procedure

CAUTION

Do not use TRICHLOROETHANE

or other hydrocarbon cleaning com-

pounds.

Chassis

*Inspect interconnections and conduit

for damage, secure connections, and

tampering. Inspect vibration sensor

(detector) for tight mounting (no

free play). Ensure that cover is

securely fastened to chassis and is

not damaged. Inspect exterior sur-

face for paint damage, dust, dirt,

grease, rust, and corrosion. Clean

exterior surface using a cloth damp-

ened in a solution of mild detergent

and water. Rinse with a cloth damp-

ened in cold water and dry throughly.

*Repair not authorized at organizational level. Notify direct support maintenance personnel of

any defects.

3-1