ORGANIZATIONAL MAINTENANCE INSTRUCTIONS
5-1. Inspection of Sensor Cable
Inspect the sensor cable periodically for cracked insulation, deformities or sharp bends. Report any physical damage of
the cable, to direct support maintenance.
5-2. Inspection and Replacement of Mounting Blocks
Periodically inspect the protected equipment mounting blocks for evidence of deformity or cracks. Replace blocks as
The blocks must be in good physical shape to provide proper equipment insulation from ground..
Remove old paint with paint remover until a clean, dry, bare metal surface is obtained. Repaint with a rust inhibiting
primer. Finish with a light grey textured vinyl organasol paint matching color chips 26492 in Federal Standard 595.