Special Information. - TM-9-2350-256-24P-20014

TM 9-2350-256-24P-2 C01

b. PART NUMBER INDEX. Part numbers in this index are listed by part number in ascending alphanumeric

sequence (i.e., vertical arrangement of letter and number combination which places the first letter or digit of each group in

order A through Z, followed by the numbers 0 through 9 and each following letter or digit in like order).

(1) CAGEC column. The Commercial and Government Entity Code (CAGEC) is a 5-digit numeric code used

to identify the manufacturer, distributor, or Government agency, etc., that supplies the item.

(2) PART NUMBER column. Indicates the primary number used by the manufacturer (individual, firm,

corporation, or Government activity), which controls the design and characteristics of the item by means of its engineering

drawings, specifications, standards, and inspection requirements to identify an item or range of items.

(3) STOCK NUMBER column. This column lists the NSN for the associated part number and manufacturer

identified in the PART NUMBER and CAGEC columns to the left.

(4) FIG. column. This column lists the number of the figure where the item is identified/located in Section II

and IIl.

(5) ITEM column. The item number is that number assigned to the item as it appears in the figure

referenced in the adjacent figure number column.

FIGURE AND ITEM NUMBER INDEX.

(1) FIG. column. This column lists the number of the figure where the item is identified in Section II and IIl.

(2) ITEM column. The item number is that number assigned to the item as it appears in the figure

referenced in the adjacent figure number column.

(3) STOCK NUMBER column. This column lists the NSN for the item.

(4) CAGEC column. The Commercial and Government Entity Code (CAGEC) is a 5-digit numeric code used

to identify the manufacturer, distributor, Government agency, etc., which supplies the item.

(5) PART NUMBER column. Indicates the primary number used by the manufacturer (individual, firm,

corporation, or Government activity), which controls the design and characteristics of the item by means of its engineering

drawings, specifications, standards, and inspection requirements to identify an item or range of items.

5. Special Information.

a. USABLE ON CODE. The usable on code appears in the lower left comer of the Description column heading.

Usable on codes are shown as "UOC: ...... ` in the Description Column (justified left) on the first line applicable item

description/nomenclature. Uncoded items are applicable to all models. Identification of the usable on codes used in the

RPSTL are:

Code

Used On

C60

M88A1

b. FABRICATION INSTRUCTIONS. Bulk materials required to manufacture items are listed in the Bulk Material

Functional Group of this RPSTL. Part numbers for bulk materials are also referenced in the description column of the line

item entry for the item to be manufactured/fabricated. Detailed fabrication instructions for items source coded to be

manufactured or fabricated are found in TM 9-2350-256-34-2.

c. ASSEMBLY INSTRUCTION. Detailed assembly instructions for items source coded to be assembled from

component part/repair parts are found in TM 9-2350-256-34-2. Items that make up the assembly are listed immediately

following the assembly item entry or reference is made to an applicable figure.