|
|
TM
9-2350-238-20-2
Table
2-2.
PREVENTIVE MAINTENANCE CHECKS AND SERVICES WITH LUBRICATION
INSTRUCTIONS FOR M578 RECOVERY VEHICLE (CONT)
lnterval
Item To Check/
Item
Procedure
Not Fully Mission
No.
Service
Capable If:
7
(cont)
b. Remove the following items in the order listed
below:
(1) Six machine screws (2) and Iockwashers
(3).
(2) Retaining pin (4).
(3) Flange (5).
(4) Retainer (6).
(5) Gaskets (7).
c. Rotate T-handle (8) in strainer counterclockwise,
s e v e r a l turns, to release strainer assembly.
d . Lift filter and strainer assembly from reservoir.
D r y cleaning solvent (SD2) is toxic and
flammable. Wear protective goggles and
gloves and use only in well-ventilated area.
e. Clean filter and strainer assembly with dry
cleaning solvent (item 10, appx C).
f.
D r y and inspect filter and strainer assembly.
g. Replace both gaskets (7).
h . Install filter and strainer assembly by reversing
removal procedure above.
Change 1
2-10.8
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |