|
|
TM
9-2350-238-20-2
Dry cleaning solvent (item 10, appx C) is toxic and flammable. To avoid injury, wear
protective goggles and gloves and use only in well-ventilated areas. Avoid contact with
skin or eyes and do not breathe vapors. Do not use near open fire or excessive heat.
The flash point for Type I dry cleaning solvent is 100F (38C), and for Type II is 140F
(60C). If you feel dizzy while using dry cleaning solvent, get fresh air immediately and
get medical aid. If contact with eye is made, wash your eyes with water and get medical
aid immediately.
( 1 0 ) C l e a n i n g . Use clean rag (item 16, appx C) and dry cleaning solvent (item 10, appx C)
to clean grease or oil from all metal surfaces except those exposed to powder fouling. For powder
fouled surfaces, use CLP (item 5, appx C).
LUBRICANT TABLE
REFILL
EXPECTED
CAPACITY
INTERVALS
TEMPERATURE
LUBRICANT/COMPONENTS
(APPROX)
Above
0F
Quarterly/
Tow
Winch
5.0 qt
Oil,
Lubricating,
Semiannually/
OE/HDO
(item
14.1,
( 4 . 7 l)
(Above
-18C)
Annually
Above
0F
Quarterly/
Boom
Winch
3.0 qt
Oil, Lubricating,
Semiannually/
OE/HDO (item 14.1,
( 2 . 8 l)
(Above
-18C)
Annually
0F to +40F
Oil, Lubricating,
Refill
Quarterly/
140 gal.
(-18C
to
+4C)
1 8 Month
OE/HDO 10 (item 14.1,
(530 l)
Dry 165 gal.
Oil, Lubricating, OEA
(624.5 l)
(item 14.2, appx C)
Below
+40F
Quarterly/
Tow
Winch
5.0 qt
Oil,
Lubricating,
Semiannually/
(Below
+4C)
(4.7 l)
OEA
(item
14.2,
Annually
Below
+40F
Quarterly/
Boom
Winch
Oil,
Lubricating,
3.0 qt
Semiannually/
(Below
+4C)
(2.8 l)
OEA
(item
14.2,
Annually
Quarterly/
0F
to
+40F
1.0 qt
Traversing
Gearcase
Oil,
Lubricating,
Annually
(-18C
to
+4C)
Upper
Section
OEA
(item
14.2,
(0.95 l)
Quarterly/
0F
to
+40F
Traversing
Gearcase
Oil,
Lubricating,
3.0 qt
Annually
(-18C
to
+4C)
Lower
Section
(2.8 l)
OEA
(item
14.2,
2-10.3
Change 1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |