Removal - TM-9-2350-238-20-11203

TM 9-2350-238-20-1

Make sure MASTER switch is OFF before repairing electrical components.

Failure to observe this warning could result in injury or death.

Failure to remove or disconnect the batteries before removing or installing any

electrical wiring harness or lead may result in injury or damaged equipment.

1 Disconnect ground cable assembly (1) from gas-particulate filter unit M8A3 (2).

2 Unscrew and disconnect connector (3) from gas-particulate filter unit M8A3 (2).

3 Disconnect hoses (4) from gas-particulate filter unit M8A3 (2).

4 Release hold down latch (5) and remove

gas-particulate filter unit M8A3 (2) from

frame assembly (6).

5 Remove four nuts (7), four Iockwashers

(8), four machine screws (9), frame

assembly (6), and ground cable assembly

(1) from weldment.

2-1177