MAINTENANCE OF FIRE EXTINGUISHER RETAINING STRAP.

TM 9-2350-238-20-1

2-207. MAINTENANCE OF FIRE EXTINGUISHER RETAINING STRAP.

c. Reassembly

b. Inspection/Repair

a. Disassembly

This task covers:

INITIAL SETUP

Equipment Conditions

Materials/Parts

2-923 Access cover removed

Self-locking nut (4)

References

TM 9-2350-238-24P-1

NOTE

Cylinder fire extinguisher is shown removed for clarity. Fire extinguisher retaining

straps can be repaired without removing the cylinder fire extinguisher.

1 Remove four self-locking nuts (1), four flat

washers (2), four machine bolts (3), and

two extinguisher bracket retaining straps

(4) .

2 Remove two headless straight pins (5)

and two extinguisher bracket retaining

bands (6).

1 Inspect for broken, damaged, or missing

parts.

2 Repair is by replacement of authorized

parts (TM 9-2350-238-24P-1).

NOTE

Replace headless straight pins only if

damaged.

1 Position two extinguisher bracket retaining

bands (6) on vehicle frame, and secure

with two headless straight pins (5).

2 Position two extinguisher bracket retaining

straps (4) on vehicle frame, and secure

with four machine bolts (3), four flat wash-

ers (2), and four new self-locking nuts (1).

2-1174