|
|
TM 9-2350-238-20-1
2-201. MAINTENANCE OF ARCTIC TRACTION KIT (CONT).
NOTE
It is not necessary to remove track from vehicle to replace arctic track pad.
Remove one track at a time.
Select area large enough to allow vehicle to be driven or towed at least 5 vehicle
lengths.
Procedures are written for one track, but apply to both tracks.
Remove two self-locking nuts (1).
1
Keep personnel away from vehicle.
Personnel injury could result when
track falls away from idler wheel.
NOTE
Step 2 applies to the removal of the
track shoe link pin from the top of a
roadwheel.
Install impact wire adapter on track shoe
2
link pin (2). Attach slide puller to impact
wire adapter and remove track shoe link
pin (2) from track (3).
3
Using driftpin, drive out track shoe link pin
(2).
4
Slowly back vehicle until track is
completely lying on ground.
Back vehicle off track.
5
2-1146
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |