INSTALLATION (Cont) - TM-9-2350-238-20-11161

TM 9-2350-238-20-1

Align base assembly (1) with four screw holes and install four new Iockwashers (2) and four

hexagon head capscrews (3).

Position upper half of windshield to base butt hinge (4) on vehicular window (5). Align holes,

and install two machine screws (6), two flat washers (7), and two new self-locking nuts (8).

Position upper half of windshield to base butt hinge (9) on vehicular window (5). Align holes,

and install three machine screws (10), three flat washers (11), and three new self-locking nuts

(12) .

Install vehicular window (5) on base assembly (1).

Position lower half of windshield to base butt hinge (13) on base assembly (1), align holes, and

install two machine screws (14), two flat washers (15), and two new self-locking nuts (16).

Align holes in upper (4) and lower (13) halves of windshield to base butt hinge, and secure by

installing hinge to base pin assembly (17) and new cotter pin (18).

Position lower half of windshield to base butt hinge (19) on base assembly (1), align holes, and

install three machine screws (20), three flat washers (21), and three new self-locking nuts (22).

Align holes in upper (9) and lower (19) halves of windshield to base butt hinge, and secure by

installing hinge to base pin assembly (23) and new cotter pin (24).

Position window assembly (25) on base assembly (1). Latch three window assembly to

windshield assembly cylinder fasteners (26), and connect window assembly chains (27) on both

sides of window assembly.

2-1135