|
|
TM 9-2350-238-20-1
2-196. MAINTENANCE OF CRANE OPERATOR'S ENCLOSURE KIT (CONT).
REMOVAL (CONT)
13
Peel back a portion of the operator's
cupola ring cushioning pad (19) and
withdraw circuit breaker to wiper motor
and defroster electrical lead assembly (13)
through the 1/2-in. (12.70-mm) in the
operator's cupola ring cushioning pad (19).
Using sealant, fill the 1/2-in. (12.70-mm)
14
hole to prevent entry of moisture into the
cab.
Dry cleaning solvent (SD2) is toxic
and flammable. Wear protective
goggles and gloves and use only in
well-ventilated area.
Using dry cleaning solvent, remove
15
adhesive residue from cupola (20).
Using liquid soap and water, clean
16
operator's cupola ring cushioning pad (19).
Using adhesive, reseal operator's cupola
17
ring cushioning pad (19).
Close vehicular window (7).
18
Pull down and hook base straps (3) on
19
two screws (4).
2-1124
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |