|
|
TM 9-2350-238-20-1
TESTING
1 Turn the MASTER switch, instrument panel switch, and the wiper motor switch to ON,
2 If the wiper motor doesn't operate, re-check the electrical connections and leads.
REMOVAL
Failure to remove or disconnect
batteries before removing or installing
any electrical wiring harness or lead
may result in injury or damaged
equipment.
1 Loosen and remove webbing strap (1) on
hatch torsion bar (2).
2 Pull down and unhook two base straps (3)
from two screws (4).
3 Detach the crane operator's window
assembly rear seal (5) from matching tape
strip (6).
2-1121
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |