|
|
]TM 9-2350-238-20-1
9
Install pipe to tube elbow (23) and
nonmetallic hose assembly (24) on fluid
filter (16).
10
Install two pipe straight adapters (25) and
metal tube assembly (26).
11
Install pipe to tube elbow (27), pipe
straight adapter (28), and preformed metal
tube assembly (29) on personnel heater
tank assembly (30).
12
Install control box assembly to heater
assembly wiring harness (31), two loop
clamps (32), two hexagon head capscrews
(33), two new Iockwashers (34), and two
hexagon plain nuts (35).
13
Install heater bracket (36), two new
lockwashers (37), and two hexagon plain
nuts (38) on electrical control box (39).
14
Install electrical control box (39) with
heater bracket (36), new lockwasher (40),
and hexagon head capscrew (41) on
personnel heater tank assembly (30).
15
Connect control box assembly to heater
assembly wiring harness (31) to electrical
control box (39). Connect shell connector
(42) to electric fuel pump lead (43).
16
Connect ground terminal (44) with new
lockwasher (45) and hexagon head
capscrew (46) to heater bracket (36).
2-1109
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |