|
|
TM 9-2350-238-20-1
14
Install new exhaust tube gasket (29), tube
coupling (30), and metallic bent tube (31).
15
Tighten two bolts on tube coupling (30).
Torque bolts to 70.00 in.-lb (7.91 N-m).
16
Install heater tube exhaust connector (32),
four new lockwashers (33), four hexagon
head capscrews (34).
17
Connect branched wiring harness (35) to
circuit breaker and heater control box.
2-195. MAINTENANCE OF PERSONNEL VEHICULAR HEATER ASSEMBLY, PERSON-
NEL VEHICULAR HEATER ASSEMBLY (TANK ASSEMBLY, FILTER, AND
PUMP), AND CONTROL BOX ASSEMBLY TO HEATER ASSEMBLY WIRING
HARNESS (WINTERIZATION KIT).
This task covers:
b. Inspection/Repair
a. Disassembly
c. Reassembly
INITIAL SETUP
Materials/Parts
References
Electrical wire (figure D-2, appx D)
TM 9-2350-238-24P-1
Fuel tank ring gasket
Gasket
Equipment Conditions
Instruction plate
2-1098 Personnel vehicular heater
LockWasher (2)
assembly removed
LockWasher (12)
Screen
Self-locking nut (8)
2-1103
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |