INSPECTIONIREPAIR

TM 9-2350-238-20-1

1 Remove two seal assemblies (1 and 2) from between winch and curved portion of cab front.

2 Remove machine screw (3) and hexagon plain nut (4) to disconnect two single chain

assemblies (5).

3 Remove two machine screws (6), two self-locking nuts (7), four flat washers (8), and two single

chain assemblies (5) from two boom winch cover protective plugs (9). Remove two boom winch

cover protective plugs.

4 Remove two ammunition box tray webbing straps (10) from two boom cylinder ammunition box

tray assemblies (11).

5 Remove eight hose clamps (12), and two boom cylinder ammunition box tray assemblies (11),

Remove two hexagon head capscrews (13), two Iockwashers (14), and ammunition box tray

boom cylinder bar (15), and two boom cylinder ammunition box tray assemblies (11).

6 Remove two ammunition box tray webbing straps (15) from two cab ammunition box tray

assemblies (16).

7 Remove eight hexagon head capscrews (17), eight lockwashers (18), and two cab ammunition

box tray assemblies (16).

8 Remove four hose clamps (19) from two boom cylinder dust and moisture boots (20). Remove

twelve machine screws (21 ), twelve flat washers (22), two lower retainers (23), two upper

retainers (24), and two boom cylinder dust and moisture boots (20).

INSPECTIONIREPAIR

1 Inspect for broken, damaged, or missing parts.

2 Repair is by replacement of authorized parts (TM 9-2350-238-24P-1).

2-1095