|
|
TM 9-2350-238-20-1
10 Connect cable terminal (17) of heating
14 Untag and connect plug connectors of
element to slave electrical lead (5) to
heating element to slave electrical lead (5),
personnel vehicular heater with assembled
overheat thermostat to relay branched
washer screw (18).
element electrical lead (16) to oil reservoir
11 Install new heater assembly gasket (19).
heater assembly (20).
12 Install oil reservoir heater assembly (20) in
15 Wiring harnesses and leads are secured to
hydraulic oil reservoir.
the hull and components with loop clamps,
straps, clips, ground screws, etc. During
13 Install six packings with retainers (21) and
installation, make sure the wiring harness
six screws (22).
or lead is secure and all hardware is tight.
2-193. MAINTENANCE OF VEHICULAR PARTS KIT--BOOTS, PLUGS, TRAYS, AND
RELATED PARTS.
This task covers:
a. Removal
b. Inspection/Repair
c. Installation
INITIAL SETUP
Materials/Parts
References
LockWasher (10)
TM 9-2350-238-24P-1
Self-locking nut (2)
2-1093
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |