INSPECTION/REPAIR - TM-9-2350-238-20-11103

TM 9-2350-238-20-1

NOTE

Steps 11 and 12 are written for one window strap plate, but apply to both window

strap plates.

11 Remove two machine screws (30), two lockwashers (31), and window strap plate (32).

12 Remove hexagon plain nut (33), flat washer (34), machine screw (19), hexagon plain nut (35),

lockwasher (36), and flat washer (37).

13 Remove cotter pin (38), chain assembly (39), two machine screws (40), flat washer (41), two

self-locking nuts (42), and lower half of butt hinge (43) from lower half of windshield pivot

retaining spring (44).

14 Remove cotter pin (45), chain assembly (46), two self-locking nuts (47), flat washer (48), two

machine screws (49), and lower half of butt hinge (50) from lower half of windshield pivot

retaining spring (51).

15 Remove vehicular window (52) from driver's base assembly (27).

16 If damaged, remove identification marker (53) from vehicular window (52).

17 Remove three machine screws (54), flat washer (55), windshield pivot retaining spring (44),

windshield support (56), and upper half of butt hinge (57) from vehicular window (52).

18 Remove two machine screws (58), windshield pivot retaining spring (51), windshield support

(59), and upper half of butt hinge (60) from vehicular window (52).

INSPECTION/REPAIR

1 Inspect for broken, damaged, or missing parts.

2 Vehicular window is a repairable assembly. Refer to page 2-1084.

3 Driver's and crane operator's vehicular windows are repairable assemblies. Refer to page

4 Windshield wiper motor assembly is a repairable assembly. Notify direct support maintenance.

5 Repair is by replacement of authorized parts (TM 9-2350-238-24P-1).

2-1077