|
|
TM 9-2350-238-20-1
Failure to remove or disconnect batteries before removing or installing any electrical
wiring harness or lead may result in injury or damaged equipment.
Remove three marker bands (1) and electrical tiedown strap (2).
1
Remove two hexagon plain nuts (3), two Iockwashers (4), defroster to switch and ground lead
2
disconnect electrical lead (5), disconnect defroster to switch and ground lead disconnects
electrical lead (6), and two machine screws (7) from windshield.
Disconnect defroster to switch and ground lead disconnect electrical lead (5) from wiper motor
3
and defroster lead disconnects electrical lead assembly (8).
4
Disconnect disconnect defroster to switch and ground lead disconnects electrical lead (6) from
toggle switch (9).
Disconnect circuit breaker to wiper motor and defroster switch electrical lead assembly (10)
5
from toggle switch (9) and circuit breaker behind driver's seat.
Remove self-locking nut (11), loop clamp (12), and machine screw (13).
6
Remove machine screw (14), IockwaSher (1 5), wiper motor to switch electrical lead (16), and
7
wiper motor to ground lead disconnect (17) from windshield wiper motor assembly (18).
Disconnect wiper motor to ground lead disconnect (17) from wiper motor and defroster lead
disconnects electrical lead assembly (8).
Disconnect wiper motor to switch electrical lead (16) from toggle switch (19).
9
Disconnect circuit breaker to wiper motor and defroster switch electrical lead assembly (10)
10
from toggle switch (19).
Remove self-locking nut (20), loop clamp (21), and machine screw (22).
11
Remove wiper motor and defroster lead disconnects electrical lead assembly (8), circuit breaker
12
to wiper motor and defroster switch electrical lead assembly (10), and rubber grommet (23) from
driver's cupola, and install electrical end seal plug (24) in hole.
1 Inspect for broken, damaged, or missing parts.
2 If damaged or missing, replace marker bands. Etch or stamp lead number on new band.
2-1071
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |