MAINTENANCE OF HEATER ELECTRICAL CONTROL BOX (HEATER INSTALLATION KIT)

TM 9-2350-238-20-1

2-185. MAINTENANCE OF HEATER ELECTRICAL CONTROL BOX (HEATER

INSTALLATION KIT).

Inspection/Repair

a. Disassembly

This task covers:

c. Reassembly

INITIAL SETUP

References

Materials/Parts

TM 9-2350-238-24P-1

Silicone compound(item 40, appx C)

Incandescent lamp

NOTE

There are three heaters in the heater

installation kit, and each has a heater

electrical control box. The following

steps are written for one electrical

control box, but illustrated for all

three.

Unscrew lens (1) from heater electrical control

box (2) and remove incandescent lamp (3).

1 Check for broken, damaged, or missing

parts.

2 For further disassembly of heater electrical

control box, notify direct support

maintenance.

3 Repair is by replacement of authorized

parts (TM 9-2350-238-24 P-1).

Lightly apply silicone compound to lamp socket

(4) and install new incandescent lamp (3).

Screw lens (1) securely on heater electrical

control box (2).

2-1055