|
|
TM 9-2350-238-20-1
2-182. MAINTENANCE OF HEATER INSTALLATION KIT--ELECTRICALWIRING (CONT).
1 Install battery positive terminal to circuit breaker electrical lead (1) to circuit breaker (2).
2 Untag and connect battery positive terminal to circuit breaker electrical lead (1) to battery
positive terminal (3).
3 Install battery positive terminal to circuit breaker electrical lead (4) to coolant heater circuit
breaker (5).
4 Untag and connect battery positive terminal to circuit breaker electrical lead (4) to battery
positive terminal (6).
5 Wiring harnesses and leads are secured to the hull and components with loop clamps, straps,
clips, ground screws, etc. During installation, make sure the wiring harness or lead is secure
and all hardware is tight.
2-1050
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |