|
|
TM 9-2350-238-20-1
2
Unfasten three clasps (4) and fasten exhaust port cover (2) in rolled-up position.
3
Unfasten four clasps (5) and fasten exhaust cover assembly (3) in rolled-up position.
4
Remove two machine screws (6) and strap fastener loop (7) from vehicle.
5
Remove two hexagon head capscrews (8), two flat washers (9), and heater exhaust outlet cover
plate (10). Reach through screen (11) and remove two heater exhaust outlet plate access
covers (12).
6
Remove seven hexagon head capscrews (13), seven flat washers (14), and seven hull exhaust
port cover brackets (15). Reach through screen (16) and remove seven port cover retaining
bracket access covers (17).
7
Remove four hexagon head capscrews (18), four flat washers (19), and exhaust cover
assembly (2). Reach through screen and remove four port cover retaining bracket plates (20).
Remove three hexagon head capscrews (21), three flat washers (22), and exhaust port cover
8
(3). Reach through screen and remove three port cover retaining bracket plates (23).
9
Remove two machine screws (24), two Iockwashers (25), generator air intake (26), and
generator air intake gasket (27) from inside of hull.
Remove eight hexagon head capscrews (28), eight lockwashers (29), and two battery
10
compartment air intake port access covers (30).
Remove three self-locking nuts (31), three flat washers (32), three machine bolts (33), and air
11
intake cover (34) from side of hull.
NOTE
Retain existing screws securing mechanical guard.
Remove eight screws (35) and mechanical guard (36).
12
13
Remove 12 snap fastener studs (37), 36 flat washers (38), and air intake grille radiator fabric
cover (39) from vehicle.
1 Inspect for broken, damaged, or missing parts.
2 Repair is by replacement of authorized parts (TM 9-2350-238-24P-1).
2-1037
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |