 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2350-238-20-1
2-176. MAINTENANCE OF HEATER INSTALLATION KIT--HOSES AND FITTINGS
(CONT).
REMOVAL (CONT)
Remove three machine screws (10), three
4
Iockwashers (11), and three loop clamps
(12).
Remove two hose clamps (13) and rubber
5
hose (14) from straight adapter (15) and
engine coolant heater assembly.
Remove two hose clamps (16), nonme-
6
tallic grommet (17), and rubber hose (18)
from drain cock (19) and battery box.
Remove drain cock (19) from engine block
7
behind fuel filter.
Remove two hose clamps (20), nonme-
8
tallic grommet (21), and rubber hose (22)
from straight adapter (23) and battery box.
Remove two straight adapters (15 and 23)
9
from plug cock (24).
Remove two hose clamps (25) and non-
10
metallic hose (26) from straight adapter
(27).
NOTE
Two nuts are supplied with air purge
two-way control valve. Use care not
to lose or damage nuts.
Remove nut (28) and air purge two-way
11
control valve (29) from air purge valve
angle bracket (30).
Remove nut (31) and straight adapter (27)
12
from air purge two-way control valve (29).
Remove machine screw (32), lockwasher
13
(33), and air purge valve angle bracket
(30) from wall of battery compartment.
2-1012
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals