|
|
TM 9-2350-238-20-1
1 Inspect for broken, damaged, or missing parts.
2 Repair is by replacement of authorized parts (TM 9-2350-238-24P-1).
1
Position heater air duct (1) on battery
bottom plate (2), and secure with two flat
washers (3) and two machine screws (4).
Position two angle brackets (5) on each
2
battery support plate bracket (6), and
secure with four hexagon plain nuts (7),
eight flat washers (8), and four machine
screws (9).
3
Position each battery support plate bracket
(6) with attached parts on battery bottom
plate (2), and secure with four flat washers
(10) and four machine screws (11).
4
Position two battery box plates (12) on two
battery support plate brackets (6), and
secure with four new Iockwashers (13)
and four hexagon head capscrews (14).
Position two support plate angle brackets
5
(15) against hull and two battery support
brackets (6), and secure with four new
lockwashers (16) and four machine screws
(17) .
2-1007
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |