|
|
TM 9-2350-238-20-1
1
Remove four hexagon head capscrews
(1), four Iockwashers (2), and coolant
heater exhaust pipe (3) from engine
coolant heater (4).
Remove four hexagon head capscrews
2
(5), four Iockwashers (6), and coolant
heater shield (7) from engine coolant
heater (4).
Remove 12 screws (8) and 12 washers (9)
3
from coolant heater mounting plate (10).
Lift engine coolant heater (4) from hull and
4
support.
5
Disconnect fuel lines, refer to page
Disconnect water hoses, refer to page
6
Tag and disconnect electrical leads.
Remove hexagon plain nut (11), lock-
washer (12), hexagon head capscrew
(13), and exhaust clamp (14) from hull.
Loosen and remove two hose clamps (15
9
and 16) and exhaust clamp (14) from
exhaust hose (17).
Remove two loop clamps (18).
10
Remove two hexagon head capscrews
11
(19) and loop clamp (20) from exhaust
hose (17).
12
Remove exhaust hose (17) from driver's
heater exhaust assembly (21).
Remove three hexagon head capscrews
(22), three Iockwashers (23), exhaust
mount plate (24), gasket (25), and driver's
heater exhaust assembly (21).
14
Remove heater exhaust coupling (26) from
vehicular heater (27).
2-1001
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |