|
|
TM 9-2350-238-20-1
4 Remove four self-locking nuts (5), four
machine screws (6), and DIESEL FUEL
ONLY identification plate (7) from hull.
NOTE
Step 5 is written for one suspension
lockout cylinder but applies to all
suspension lockout cylinders and the
two hydraulic cylinder assemblies.
5 Remove three drive screws (8) and
suspension lockout cylinder identification
plate (9).
7 If damaged, remove HIGH NOISE LEVEL
6 Remove two drive screws (10) and
instruction plate (12) from bulkhead.
ENGINE SHUTDOWN identification plate
(11) from driver's compartment wall.
2-993
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |