|
|
TM 9-2350-238-20-1
20 Remove two hexagon head capscrews
(24) and two Iockwashers (25).
21 Remove hexagon head capscrew (26),
Iockwasher (27), and spade cylinder
keeper (28).
22 Using hammer and drift pin, drive out
spade cylinder pin (29).
23 Using hoist and sling, raise spade (30)
slowly and remove from vehicle.
NOTE
Step 24 is written for the spade hinge
lever but also applies to the remote
control lever.
24 Remove cotter pin (31), ten ring spacers
(32), headed grooved pin (33), and spade
hinge lever (34).
2-971
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |