 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2350-238-20-1
If removed, install six retaining rings (11)
8
and nine driver's compartment cowl
turnlock fastener studs (12) in driver's
compartment aft cowl (13).
Slide fire extinguisher control cable (14)
9
and nut (15) into slot in driver's
compartment aft cowl (13), and install
driver's compartment aft cowl. Secure
nine driver's compartment cowl turnlock
fastener studs (12).
Tighten nut (15) and install new
10
antipilferage seal (16) around fire
extinguisher control cable (14) and
through head of hexagon head capscrew
(17).
NOTE
Step 11 is written for installation of
left fender extension step, but applies
to both left and right fender extension
steps.
Install left fender extension step (18), and
11
secure with two new cotter pins (19).
Install two flat washers (20), helical
12
compression spring (21 ), and fuel filler
cover latch radiator filler pin (22) in hull
bracket (23).
Install new spring pin (24) in fuel filler
13
cover latch radiator filler pin (22).
14
Install fuel filler cover hinge stepped
spacer (25), fuel filler cover hinge plate
spacer (26), and fuel filler access door
(27). Secure with four new self-locking
nuts (28) and four square neck bolts (29).
Pull fuel filler cover latch radiator filler pin
15
(22) to latch, and secure fuel filler access
door (27).
2-933
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals